Description
Working Principle
YK type pressure controller using butterfly metal film as sensing element,is accused of medium pressure rises to a certain value,the butterfly metal diaphragm produceinstability,enthusiastically through a push rod ,to switch contact on (or )off,was charged with medium pressure decreases to another setting,butterfly mental film will suddenly back to its original state,make the switch contactor to disconnect(or allow),so as to realize control of the pressure,the products have the advantages of small size ,low cost,safe and reliable ,easy to use,long service life,ETC
Application
YK series pressure controller is a kind of advanced miniature pressure switch ,is widely used in the air-conditioning,refrigeration units,all kinds of pumps ,engineering machinery,mining machinery,construction machinery and other large machinery and equipment of liquid level ,pressure control of hydraulic ,pneumatic system ,and other needs to adjust the medium pressure ,protect the pressure in the system of industrial equipment.
Technical Parameters
|
No |
Item |
Standard Value |
|
No |
Item |
Standard Value |
|
1 |
Setting range of pressure value |
-100KP~10MPA |
8 |
Erection joint method |
Normally 1/8 ,3/8, 1/4 and 7/16.Could be customized |
|
|
2 |
Tolerance range of pressure switch |
1.45~14.5PSI 0.01~0.1MPA |
9 |
Contact form |
Normal close or Normal open |
|
|
3 |
Rated Voltage |
AC220V50Hz/ DC12/24/36/48V |
10 |
Rated Current |
3A/5A/10A |
|
|
4 |
Working temperature |
-35℃--﹢120℃ |
11 |
Maximum burst pressure |
No burst phenomenon in 1min at ≤5000PSI(34.5MPA)blast pressure |
|
|
5 |
Life cycle |
＞100000times |
12 |
Dielectric strength |
No break down or flashing in 1min at AC1500V/50HZ/min |
|
|
6 |
Insulation resistance |
Between terminal and housing≥100MΩ |
13 |
Over pressure test |
Increase to 10Mpa,No burst and leakage in 10mins |
|
|
7 |
IP Grade |
IP65 |
|
|
|
