Description
This is a pressure switch in psi. It can be used in various industries to control the pressure of water, gas, and oil. It is often used in automotive systems, hydraulic systems, air compressors and various small pumps.
The pressure parameters of this pressure switch are 70psi ON and 100psi OFF. So how does it control the start and stop of your equipment? Here is a brief introduction based on this pressure value:
When your equipment is in a shutdown state, our switch is in a normally closed state, that is, it is Power-on state.So when you turn on the device, the pressure switch is already in an on state. At this time, the device starts, and the pressure in the device starts to rise. When the pressure rises to 100psi, the pressure switch will be disconnected and the device will get Protect, stop working.At this time, the pressure in the equipment will also slowly drop. When the pressure drops to 70psi, the pressure switch will be turned on, turn on the equipment, and it will stop when the pressure rises to 100psi, so the pressure in the equipment will always be maintained at 70psi Between 100psi and 100psi, neither too low nor too high.It not only meets the working requirements of the equipment, but also protects the equipment.
Of course, the pressure parameters are not limited to this one. We will design suitable parameters according to the working principle of your equipment. Contact us if you need.